Page 1 of 5 1 2 3 4

Search: Type: Posts; User: Serj22 Search took 0.06 seconds.

  • Easy. Start unplugging the coils one at a time...

    Easy. Start unplugging the coils one at a time while it idles. Any of them you pull will make the car run shittier. Eventually you will run across one where nothing changes at all and the car runs...
  • Go for a drive with a tech from the alignment...

    Go for a drive with a tech from the alignment place. Their favorite thing to say when testing your vehicle to see if you have a legitimate problem with their work is "I didn't notice anything" That...
  • Well, masking tape is a really good waxy surface...

    Well, masking tape is a really good waxy surface that generally doesn't let anything stick to it...
  • Lol. Unfortunately no. But me and my dad worked...

    Lol. Unfortunately no. But me and my dad worked out how to do it. We'd have to extend the body panels of the car about 3 feet forward to get it into the main frame of the car, then we'd have to raise...
  • Well, I know I've always showed it with...

    Well, I know I've always showed it with protection on, but today was the day to get the hoist balancer out and work a plan out to raise this beautiful beast.

    I cleared a bunch of room in the shop...
  • Replies
    4,770
    Views
    127,396

    Any boating supply store will have it all....

    Any boating supply store will have it all. Boaters resin is cheap and can be had in large quantities. They will also have a roll of nicely woven fiberglass, though it's not as ideal as chop mat for...
  • Replies
    4,770
    Views
    127,396

    Pretty easy to do. Just make sure you tape off...

    Pretty easy to do. Just make sure you tape off the panel you are trying to mold to, or use tin foil or wax, or the mold wont come off.
  • Thanks, I built them a bunkbed earlier that I...

    Thanks, I built them a bunkbed earlier that I showed on here a bit ago. Pretty simple design. I'd rather they have a whole bunch of room to play since they share a room, rather than a bunch of beds...
  • There was a guy who used to come by my dad's...

    There was a guy who used to come by my dad's landlord's shop and look for era correct cars for movies, and that was his whole job. A lot of people do it. So sometimes they buy cars right off the...
  • When painting fabric, sometimes you need to scrub...

    When painting fabric, sometimes you need to scrub the fabric or paint it at multiple angles. VHT makes a vinyl fleixlbe paint to do what you are trying to do. The first time you move this piece, I'm...
  • The ones I always remember on glass roofed cars...

    The ones I always remember on glass roofed cars were a small plastic plug you took out of the headliner and then put a drill on a little bolt, and spun it manually to close.
  • I haven't been doing anything too interesting...

    I haven't been doing anything too interesting lately, still waiting to start my new job, and just restoring boats every other week. I'll be starting a new Chris Craft project next week, so I got to...
  • Replies
    6,011
    Views
    212,852

    you spray painted it?

    you spray painted it?
  • Fixed that for you.

    Fixed that for you.
  • My entire car was built in Los Angeles....

    My entire car was built in Los Angeles. Everything about it is "murica" When I think "made in mexico" I think about the god-awful VW interiors I've had. What junk.
  • I stopped reading at the made in mexico thing. In...

    I stopped reading at the made in mexico thing. In reality I did read, but still. It's kind of gross to know that a Dodge Avenger and a Toyota Camry are more American than a challenger...
  • Replies
    4,770
    Views
    127,396

    I know what it is. lol. I misread. I popped two...

    I know what it is. lol. I misread. I popped two of those in my car. I just tightened em down as much as possible and closed it back up and that was that.
  • Did you ask if they really are putting the 707hp...

    Did you ask if they really are putting the 707hp in the Charger? Its a rumor floating around.

    26th July 2014



    I know how you feel. Any time I step out of my car I get bombarded with...
  • Replies
    4,770
    Views
    127,396

    For some reason I misread that as being a brake...

    For some reason I misread that as being a brake dust shield. I still have no idea. I popped 2 cylinders on my dart recently (FR,RR), and put new ones in all 4, but I just tightened em down pretty...
  • THIS X 1000 You can try and compress water all...

    THIS X 1000 You can try and compress water all you want - not going to happen.

    I thought I hydrolocked a motor before, turned out the filter was just soaked in water. Took filter off - started.
    ...
  • Replies
    4,770
    Views
    127,396

    probably around 6,000ft# Was there a dust...

    probably around 6,000ft#

    Was there a dust shield on there to begin with? I'm thinking when someone put the AR/ 5 spoke wheels on it, they added those, which may be why you can't find specs on it....
  • I like it for dipping crescent wrench handles in,...

    I like it for dipping crescent wrench handles in, as its original intent. I think if you want a green car, go ahead and man up and go get your car painted green - and so on. I like the whole idea of...
  • Replies
    14
    Views
    244

    Its exciting to learn local police tactics as...

    Its exciting to learn local police tactics as you're having your tires shot out while doing 100 and sipping some booze relaying info to the ultimate driving app.
  • Replies
    14
    Views
    244

    That doesn't even sound remotely fun, unless your...

    That doesn't even sound remotely fun, unless your drinking and doing 100 at the same time - then it would be awesome!
  • Anyone else think the galant and charger had some...

    Anyone else think the galant and charger had some pretty similar styling on the ass end?

    http://img.netcarshow.com/Mitsubishi-Galant_Ralliart_2007_1600x1200_wallpaper_08.jpg
    ...
  • That's how i feel. most 70s era cars just have...

    That's how i feel. most 70s era cars just have too much of a disco/ crappy engine management vibe, and they put weird bumpers on everything.

    In other news, I put a feeler out for buying stuff at...
  • I'm just giving you junk man. I almost bought a...

    I'm just giving you junk man. I almost bought a Nova, but earlier. I'm not really a fan of 70s era cars.
  • http://images01.olx-st.com/ui/1/36/00/3453600_1.jp...

    http://images01.olx-st.com/ui/1/36/00/3453600_1.jpg

    http://www.autotraderclassics.com/images/a/2009/09/15/64563649/0_DSC00043-drags_.JPG

    Correct. 1973 duster with bowtie emblem and 350. But...
  • So you found a 350 duster?

    So you found a 350 duster?
  • Surprisingly didn't see the word "solid" in it....

    Surprisingly didn't see the word "solid" in it. That's a good thing. I usually don't like to see "its good for a 19xx". That's an excuse to sell a rusted up piece of junk in my experience.
  • I drove the v6 model too and felt that it didn't...

    I drove the v6 model too and felt that it didn't really seem like a "charger" but more like a truck. As a car its fine. Id commute with it any day. I'm also surprised that the displacement is smaller...
  • Well the dart is pretty foreign. That was an...

    Well the dart is pretty foreign. That was an Italian fiat tiger shark you were commanding with a Korean transmission by Hyundai...

    22nd July 2014


    Too bad the lre and the spirit of 76s were...
  • IF it's pre 75 I'd take it. Why do the whitelet...

    IF it's pre 75 I'd take it. Why do the whitelet tires looked blurred out?
  • I'm sure it would. Just move somewhere else....

    I'm sure it would. Just move somewhere else. "Take the super bird to arizona" every single winter and then you'll be golden.
  • Cubeman, ...

    Cubeman,

    http://www.ebay.com/itm/SUPERBIRD-DAYTONA-Body-Parts-KIT-Nose-Wing-Vents-Tail-Fits-Dodge-Challenger-/161178857062

    purchase this kit and forget about the Hellcat. lol
  • As far as I know they make slanted 6's... like...

    As far as I know they make slanted 6's... like some other car company of the past.
  • Replies
    4,770
    Views
    127,396

    Sounds like Southern California. They're pretty...

    Sounds like Southern California. They're pretty harsh down there on modifications - and all you have to have is a loud exhaust and it's grounds to open the hood and make sure your car is California...
  • Yeah, usually half or less. Generally what's the...

    Yeah, usually half or less. Generally what's the rule? Like 1/3 debt to income ratio. I made 52 with ot at my last job, and you're not living as comfortably as you'd think really. I also have two...
  • Oh fuck that. I know I told you it was...

    Oh fuck that. I know I told you it was financially unwise, but if she's gonna say no, then the only logical thing is to go buy one anyway. Leave now. Go get.
  • Replies
    4,770
    Views
    127,396

    I Like it too, but have never got it to sit well...

    I Like it too, but have never got it to sit well in an exhaust application personally. Plus the copper shows a lot when you have a mismatched mani.
  • So you need a new rear mainseal, a nitrophyl...

    So you need a new rear mainseal, a nitrophyl float conversion, and to get a carb that will take boost, or make one. I don't know that that engine is unsavable. What kind of carb are you trying to...
  • Not if he trades in a car that he is still paying...

    Not if he trades in a car that he is still paying off, then he owes 70k plus, whatever he still owes on the 08, unless it's paid off, then it's a paid off car and leave it alone, and I guarantee the...
  • Replies
    4,770
    Views
    127,396

    The grey stuff never dries completely, so its...

    The grey stuff never dries completely, so its only application is pretty much a water pump. I used it on my water pump a year ago and its still sealed tight. The black is good for the valve cover or...
  • page 440 wedge: Post wedges. ...

    page 440 wedge:

    Post wedges.

    https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTclA9P8c8irMowTL8WSZRy0wPwkbeP5qkdg3kHC_eYadEcU_QU0w
    ...
  • I doubt it would make the speakers play very loud...

    I doubt it would make the speakers play very loud at all. I think a cheaper alternative is adapting some kind of 7" in car monitor and making a car-puter in the car somewhere. But also this is not...
  • It was designed by hacker co. In 1946. Its a 1947...

    It was designed by hacker co. In 1946. Its a 1947 hacker "streamliner". It had a few odd quirks, like hand carved laps on the outer seams and a 1947 Cadillac dashboard and steering column, as well as...
  • It sounds like you have one of those disposable...

    It sounds like you have one of those disposable income things.

    11th July 2014



    Permanently mounting current electronics? That's why it's bad idea. It'd be like if you installed a laptop...
  • I haven't done much in the way of DIY stuff. I've...

    I haven't done much in the way of DIY stuff. I've been sitting at home for a week now trying to think of something to make. Shelving is boring, and I have way more than I need, and I'll be sitting...
  • Its more like if you paid money for the car, or...

    Its more like if you paid money for the car, or are still paying you expect the car to look and be a certain way. He'll likely never recover any kind of resale value out of a challenger or any other...
  • Those door sills are likely $300. I'd think those...

    Those door sills are likely $300. I'd think those door jambs could be re-shot for that much.

    Have you thought about just going the truck route? Get some 3m clear vinyl on them.
  • Results 1 to 50 of 250
    Page 1 of 5 1 2 3 4