1. Post #41
    ಥ益ಥ ... Beautiful.
    Kill001's Avatar
    April 2006
    11,984 Posts
    There is only one way to carry enough shells for a Maruzen, dump pouches.

    Trust me, no other system will let you hold enough or acquire them fast enough. I have stock mounted shell carriers as well as shell pouches, and I'm not happy with either.
    not even belt carriers allow you to get em fast enough?



    but look at how fast he reloads them


  2. Post #42
    Shotgun Guru
    notrabies's Avatar
    February 2009
    7,223 Posts
    I can see those being fast enough, but I can't see them holding enough shells, and I'm not sure how they'd hold up to crawling and stuff.
    Maybe if you could make a whole molle rig of those, but then you don't have room for other stuff.

  3. Post #43
    No such thing as overkill.
    catbarf's Avatar
    January 2007
    7,828 Posts
    I'm starting to lean towards elastic shell pouches like this. I think two of them on a belt would do it.

  4. Post #44
    Resident IFAP Phantas- magor- iologist
    Wulfram's Avatar
    July 2010
    5,966 Posts
    that's what herf has.

  5. Post #45
    DPM FEELS SO GOOD IN MY MOUTH
    Dennab
    September 2011
    2,435 Posts
    Possibly my favorite shell carrying method is the Travis Haley Fagpul way. Put a strip of Velcro on the side of the shotgun and then put Velcro on backs of shell carriers. use it up pull it off then put on a new shell carrier fully loaded.

  6. Post #46
    Shotgun Guru
    notrabies's Avatar
    February 2009
    7,223 Posts
    I'm starting to lean towards elastic shell pouches like this. I think two of them on a belt would do it.
    You can have mine for the cost of postage. I have like 4 and hate them.

  7. Post #47
    child porn prodigy
    venom's Avatar
    April 2005
    15,197 Posts
    fuck wrong threa

    Edited:

    d
    Reply With Quote Edit / Delete Reply Windows Vista Canada Show Events Funny Funny x 1 (list)

  8. Post #48
    Derubermensch's Avatar
    August 2009
    1,263 Posts
    But what if I wanted to have a railed pump for a foregrip or an <aherm> AFG? How do?

  9. Post #49
    THIS IS ENTRAP MENT
    Herfjotur's Avatar
    March 2012
    3,514 Posts
    But what if I wanted to have a railed pump for a foregrip or an <aherm> AFG? How do?
    There are two screws on the bottom of the pump, I suppose you could find a rail to bolt in to those.

  10. Post #50
    Gold Member
    TehG3A3's Avatar
    November 2007
    2,197 Posts
    But what if I wanted to have a railed pump for a foregrip or an <aherm> AFG? How do?
    Moar Gorilla Glue!
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Agree Agree x 1 (list)

  11. Post #51
    I LET MY M1 DO THE TALKING
    /Vandy/'s Avatar
    April 2012
    2,395 Posts
    Moar Gorilla Glue!
    All the Gorilla Glue

  12. Post #52
    Lizzrd's Avatar
    December 2009
    8,784 Posts
    Lizards HOW TO for attacking ugly VFGs onto dumb shotgun(tm):


    Edited:

    IT WORKS MAN TRY IT NOW!!!

    Edited:

    plz do not steal
    Reply With Quote Edit / Delete Reply Windows 7 Norway Show Events Funny Funny x 14Artistic Artistic x 1 (list)

  13. Post #53
    Gold Member
    xXEnder007Xx's Avatar
    July 2006
    3,757 Posts
    There are two screws on the bottom of the pump, I suppose you could find a rail to bolt in to those.
    Wouldn't trust it. Those screws on the DE/UTG shotguns barely grab any threads as it is. Putting a rail on there is likely to strip the threads or crack the hole for the screws when you pump it.

    You could try super gluing, but it may come off. The rail I had glued on top of my M3 randomly fell off after about 4 months of use. It may come off sooner if you put it on the pump since you're apply a good amount of force to it.
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Informative Informative x 1 (list)

  14. Post #54
    your all nerdes
    the_killer24's Avatar
    November 2007
    13,871 Posts
    once i put a shitton of duct tape on my VFG and taped it to my pump for fun

    thing was rock solid for months before i felt like taking it off
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Winner Winner x 3 (list)

  15. Post #55
    Gold Member
    TehG3A3's Avatar
    November 2007
    2,197 Posts
    Front rail came in today!

    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Winner Winner x 3 (list)

  16. Post #56
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    17,961 Posts
    This is my Tactical Shotgun, I got back from Blacksheep so I set it up as a "Checkpoint" gun. Basically something designed to intimidate and eliminate with enough stopping power to put someone down.

    ACM Mossberg 500 with heatshield, shell saddle and a flashlight mount. Put the sights back on and added my old full stock.



    brb gonna go watch Magpul Dynamic Tactical Shotgun videos
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Artistic Artistic x 1Winner Winner x 1 (list)

  17. Post #57
    THIS IS ENTRAP MENT
    Herfjotur's Avatar
    March 2012
    3,514 Posts
    Where can I get a full stock for a trishot?

  18. Post #58
    No such thing as overkill.
    catbarf's Avatar
    January 2007
    7,828 Posts
    This is my Tactical Shotgun, I got back from Blacksheep so I set it up as a "Checkpoint" gun. Basically something designed to intimidate and eliminate with enough stopping power to put someone down.

    ACM Mossberg 500 with heatshield, shell saddle and a flashlight mount. Put the sights back on and added my old full stock.



    brb gonna go watch Magpul Dynamic Tactical Shotgun videos
    Why shells on an ACM M500?

  19. Post #59
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    17,961 Posts
    Because.

    Edited:

    It is awesome.
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Agree Agree x 3 (list)

  20. Post #60
    No such thing as overkill.
    catbarf's Avatar
    January 2007
    7,828 Posts
    Good enough, was just wondering if there was another reason. Might be cool to find a way to use tri-shot shells as speedloaders.

  21. Post #61
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    17,961 Posts
    The first one is. That was my intention but in order to take the stickers off I had to boil them and in the process ruined them.
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Agree Agree x 1 (list)

  22. Post #62
    I LET MY M1 DO THE TALKING
    /Vandy/'s Avatar
    April 2012
    2,395 Posts
    The first one is. That was my intention but in order to take the stickers off I had to boil them and in the process ruined them.
    Tri-shot stickers are a bitch. They rub off just enough to look stupid, but not completely to look ok again.

  23. Post #63
    wallyroberto_2's Avatar
    August 2011
    2,284 Posts
    I got a tri-shot from a friend not long ago. It looks fantastic, I'll post pics later but I want to thank you for this tutorial. Tactical shotgun incoming.
    Reply With Quote Edit / Delete Reply Windows 7 Canada Show Events Informative Informative x 1Winner Winner x 1 (list)