1. Post #201
    Gold Member
    SGTNAPALM's Avatar
    October 2007
    22,220 Posts
    Super Mario 64 runs with no errors at full speed on my phone
    Literally, the only problem I have with emus on my phone is that controls are hard on the touch screen. That's it.
    Reply With Quote Edit / Delete Reply Windows Vista United States Show Events Agree Agree x 2 (list)

  2. Post #202
    Gold Member
    Dennab
    March 2009
    2,716 Posts
    Awesome, the N64 emulator on the PSP isn't even at that level yet
    Because PSP's HW is from 2004. Also only the original 1000 model has 32MB RAM. 2000/3000/Go have 64MB RAM.

    And here is some media
    Wolfenstein 3D (3DO)

  3. Post #203
    Gold Member
    Andy's Avatar
    January 2005
    254 Posts
    Can anybody help me with project 64? It doesn't seem to work at all! Anybody want to provide the best settings etc for it?

  4. Post #204
    Gold Member
    Dennab
    March 2009
    2,716 Posts
    You should post what exactly is the problem like is it error, crash etc.
    Also if it's some specific game it might help, too.

  5. Post #205
    Gold Member
    tratzzz's Avatar
    March 2010
    7,301 Posts
    Prject 64 has worked well for me.

    In Mario Kart 64, Razor Freestyle Scooter and Hydro Thunder.
    Lego Racer 64 was bad though.

  6. Post #206
    Gold Member
    AugustBurnsRed's Avatar
    May 2009
    5,645 Posts
    I am playing emulated Gran Turismo 2 right now, but Gran Turimo 4 doesn't work in PCSX2 :(

  7. Post #207
    Gold Member
    rampageturke 2's Avatar
    September 2010
    8,894 Posts
    I am playing emulated Gran Turismo 2 right now, but Gran Turimo 4 doesn't work in PCSX2 :(
    Same here, i'm using the actual disc, it gets to the part in the intro where it says loads of shit about trademarks, then just freezes

  8. Post #208
    Gold Member
    Dennab
    March 2009
    2,716 Posts
    NTSC version should work fine not sure about PAL one.
    Try latest version if you haven't already
    http://buildbot.orphis.net/pcsx2/

    Also you should make ISO. Using disc will result in long loading and additional lag.

    Wii Menu. If only it had any practical use :|

  9. Post #209
    raceingdemon's Avatar
    September 2008
    872 Posts
    Same here, i'm using the actual disc, it gets to the part in the intro where it says loads of shit about trademarks, then just freezes
    This, and when I make a iso of it i can play it but it artifacts so bad its unplayable and software works fine but its too slow to play.

  10. Post #210
    Gold Member
    rampageturke 2's Avatar
    September 2010
    8,894 Posts
    NTSC version should work fine not sure about PAL one.
    Try latest version if you haven't already
    http://buildbot.orphis.net/pcsx2/

    Also you should make ISO. Using disc will result in long loading and additional lag.

    Wii Menu. If only it had any practical use :|
    I tried an ISO, it didnt load at all

  11. Post #211
    Gold Member
    zerosix's Avatar
    November 2010
    4,456 Posts
    Not sure if this is the best place, but I've been meaning to mess about and find some decent games for the Wii. Anybody got any recommendations for Wii games that I can ~buy and rip to an ISO~?

  12. Post #212
    Gold Member
    ManningQB18's Avatar
    April 2009
    9,855 Posts
    Not sure if this is the best place, but I've been meaning to mess about and find some decent games for the Wii. Anybody got any recommendations for Wii games that I can ~buy and rip to an ISO~?
    Super Smash Brothers Brawl is amazing

  13. Post #213
    Gold Member
    Dennab
    March 2009
    2,716 Posts
    I tried an ISO, it didnt load at all
    Well then try new version if you didn't and post your CRC which you can find by running game Misc>Show Console and it's somewhere in console.
    This is my CRC
    Game CRC = 0x33C6E35E

  14. Post #214
    Gold Member
    SGTNAPALM's Avatar
    October 2007
    22,220 Posts
    Why is it that I can't seem to find any good Doom or Wolfenstein ports for the Android?

  15. Post #215
    Gold Member
    AugustBurnsRed's Avatar
    May 2009
    5,645 Posts
    NTSC version should work fine not sure about PAL one.
    Try latest version if you haven't already
    http://buildbot.orphis.net/pcsx2/

    Also you should make ISO. Using disc will result in long loading and additional lag.

    Wii Menu. If only it had any practical use :|
    Well it technically works, but in races it's slow as shit (unplayable) and there's artifacting sometimes.

  16. Post #216
    Gold Member
    Zeke129's Avatar
    July 2007
    41,890 Posts
    Well a PSP has a weak processor and 32 MB of RAM, a Galaxy S has 1GHz and 384 MB.
    Oh well then

    I'm too old for the internet
    I hear phone and I think 90s cell phones

    I'll just stick to using my PSP for pokemon gold. I DO have a gameboy but god damn the screen

  17. Post #217
    froztshock's Avatar
    August 2009
    2,864 Posts
    Well, this is the third time I've experienced the issue in metroid prime on dolphin where killing an enemy has caused me to be blown into limbo for no apparent reason. First 2 times it was those puffer things from magmoor caverns, this time it was a metroid in the research core of the phendrana base. I should really just savestate more :sigh:

  18. Post #218
    Gold Member
    Andy's Avatar
    January 2005
    254 Posts
    Well I tried playing Super Mario 64 and it was really choppy and the audio was pretty fucked on it.

  19. Post #219
    I wasted a dollar on a stupid title.
    nikomo's Avatar
    September 2007
    17,033 Posts
    Anyone here know how to make POV buttons work as dpad buttons with ePSXe?
    The PS2/1 to USB adapter that I have, when you enable the Dualshock analog sticks and buttons, it makes the Dpad buttons show as Point-of-view buttons like you'd see on a joystick designed for flying sims.
    If I can't figure how to make it work properly, I'll consider trying some remapping software to map the buttons to some keys on the keyboard and do it that way.

  20. Post #220
    Gold Member
    Van-man's Avatar
    August 2009
    15,159 Posts
    Anyone here know how to make POV buttons work as dpad buttons with ePSXe?
    The PS2/1 to USB adapter that I have, when you enable the Dualshock analog sticks and buttons, it makes the Dpad buttons show as Point-of-view buttons like you'd see on a joystick designed for flying sims.
    If I can't figure how to make it work properly, I'll consider trying some remapping software to map the buttons to some keys on the keyboard and do it that way.
    Tried Xpadder?
    Some of the older versions are free.

    But if you've already tried that, then just ignore me.

  21. Post #221
    I wasted a dollar on a stupid title.
    nikomo's Avatar
    September 2007
    17,033 Posts
    I ended up using Xpadder for now.

  22. Post #222
    Slithersoul's Avatar
    March 2010
    4,538 Posts
    I'm using a GBA emulator for my android phone, surprisingly good.
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Agree Agree x 2 (list)

  23. Post #223
    Pvt. Banana's Avatar
    August 2009
    882 Posts
    My G2 can run most N64 games flawlessly. I only wish that there could some how be multiplayer...

  24. Post #224
    falcont2t's Avatar
    April 2011
    2,309 Posts
    ROMs are a legal gray area: If you own the game and download a ROM of it, it's perfectly legal. If not, it's illegal.

    Also I have to agree with emulation being visually better. With emulation you can run at much higher resolutions compared to consoles, and have texture filtering, anti aliasing, etc.
    oh ok i see,so i think im downloading my 567 games "coff coff" for the emulator!

  25. Post #225
    Gold Member
    BlkDucky's Avatar
    May 2008
    6,502 Posts
    I would snip that.

    Edited:

    I mean, you could probably get away with that if you didn't do the "coff coff" thing.

  26. Post #226
    Gold Member
    rampageturke 2's Avatar
    September 2010
    8,894 Posts
    I have a .bin.ecm of a game, ran it with unecm to create a .bin. but epsxe isnt picking up the .bin, what do I do?

  27. Post #227
    Gold Member
    Dennab
    March 2009
    2,716 Posts
    Can you mount the bin with some CD emulator like daemon tools or w/e? Because if not then it's corrupted.

  28. Post #228
    Gold Member
    rampageturke 2's Avatar
    September 2010
    8,894 Posts
    Can you mount the bin with some CD emulator like daemon tools or w/e? Because if not then it's corrupted.
    It mounts with daemon tools

  29. Post #229
    Gold Member
    Van-man's Avatar
    August 2009
    15,159 Posts
    It mounts with daemon tools
    Mount it and rip it again in a preferred format.

    Had to do that to a few ancient backups I made with Alcohol 120%
    Reply With Quote Edit / Delete Reply Windows 7 Canada Show Events Agree Agree x 1 (list)

  30. Post #230
    Gold Member
    rampageturke 2's Avatar
    September 2010
    8,894 Posts
    Mount it and rip it again in a preferred format.

    Had to do that to a few ancient backups I made with Alcohol 120%
    works now, but the game keeps fucking freezing

  31. Post #231
    a-k-t-w's Avatar
    March 2008
    3,199 Posts
    NTSC version should work fine not sure about PAL one.
    Try latest version if you haven't already
    http://buildbot.orphis.net/pcsx2/

    Also you should make ISO. Using disc will result in long loading and additional lag.

    Wii Menu. If only it had any practical use :|
    can you make mii's and shit?

  32. Post #232
    Gold Member
    Dennab
    March 2009
    2,716 Posts
    Last time I tried it Mii worked, but since the wii menu isn't connected to internet you can barely do anything with it anyway.
    Reply With Quote Edit / Delete Reply Windows 7 Czech Republic Show Events Dumb Dumb x 1 (list)

  33. Post #233
    Gold Member
    SGTNAPALM's Avatar
    October 2007
    22,220 Posts
    Reposting.


  34. Post #234
    Gold Member
    synthiac's Avatar
    June 2007
    1,095 Posts

    trying to improve my widescreen hack (which is now in trunk, yay)
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Artistic Artistic x 4Winner Winner x 1Useful Useful x 1 (list)

  35. Post #235
    Gold Member
    rampageturke 2's Avatar
    September 2010
    8,894 Posts
    are there ways to fix the freezing glitch with windwaker where you need to mash start to continue during loading screens usually after cutscenes? (on dolphin)

  36. Post #236
    Gold Member
    synthiac's Avatar
    June 2007
    1,095 Posts
    windwaker
    loading screens
    uhhhh.

  37. Post #237
    Gold Member
    rampageturke 2's Avatar
    September 2010
    8,894 Posts
    well the transition between actually playing and cutscenes

  38. Post #238
    Gold Member
    SGTNAPALM's Avatar
    October 2007
    22,220 Posts
    are there ways to fix the freezing glitch with windwaker where you need to mash start to continue during loading screens usually after cutscenes? (on dolphin)
    On the very first intro cutscene, where they tell you the history of Hyrule, just let it sit. After a few minutes it will come up.

  39. Post #239
    Gold Member
    BlkDucky's Avatar
    May 2008
    6,502 Posts
    What are you guys talking about? I was playing Wind Waker earlier on Dolphin and had no cutscene freezes or whatever.
    Reply With Quote Edit / Delete Reply Windows 7 United Kingdom Show Events Agree Agree x 2 (list)

  40. Post #240
    Gold Member
    synthiac's Avatar
    June 2007
    1,095 Posts
    i have played ww on dolphin up until the triforce shard part (because fuck that) and the only issue i have had is a freeze at a certain part of the tower of the gods, which was fixed via a patch. other than that it ran fine (30fps <3).