[blaholtzen]

Phaser Rave posted:

Thanks everyone!

It could be rotated so it looks like it's biting down on the filter, but only the teeth to the right will be biting on the filter, or it could be rotated back to its original position so it doesn't look like it's hanging down (but is still broken on the right side of the jaw).

Well the broken off position adds a great deal of personality to the already very iconic model.
I was just trying to find something to criticise

It's a wonderful model and you should be proud!

Now, I'm eager to see how it will look textured.
How's your texturing skills?

Edited:

[Z] posted:

Well... I've seen quite many people who tend to think of pyro as a cuty... obviously, it's just my point of view. anyway, the point remains... THAT HAT MUST GET INGAME!

I'm sure it will, though they might save it for halloween.

[UberMunchkin]

Better screenshots:


Could I please have a little bit of constructive criticism (Except the tie, I know that is a little dodgy on red team). I actually spent quite a bit on this skin, so I hope you'll all like it. :unsmith:

[DatWut?]

blaholtzen posted:

for the record i've never seen pyro as a girl...

especially not a cute one...

(mainly becuase i use svdl's unmasked pyro)

and i think the people who do are very few

Oh god!
Female Pyro + Unmasked Pyro.
:ohdear:

[StormriderShift]

UberMunchkin posted:

Better screenshots:


Could I please have a little bit of constructive criticism (Except the tie, I know that is a little dodgy on red team). I actually spent quite a bit on this skin, so I hope you'll all like it. :unsmith:

I really like where this mod is going, will definately download when it's finished. The only problem I can see right now is the spy's skin colour is a bit off in the first picture compared to the others.

[UberMunchkin]

StormriderShift posted:

I really like where this mod is going, will definately download when it's finished. The only problem I can see right now is the spy's skin colour is a bit off in the first picture compared to the others.

I'm not good with editing skin tones, unfortunately, but a couple of my friends said they liked it.

[blaholtzen]

UberMunchkin posted:

Fixing promo
Better screenshots:


Could I please have a little bit of constructive criticism (Except the tie, I know that is alittle dodgy on red team). I actually spent quite a bit on this skin, so I hope you'll all like it. :unsmith:

maybe get rid of the stripes?
and for the tie(s) make the red ones base a little richer in color, it's dark red in the comic. and I think it would look better if the red one's suit and mask were a little more saturated and if the blue ones mask was a little less saturated

Edited:

StormriderShift posted:

I really like where this mod is going, will definately download when it's finished. The only problem I can see right now is the spy's skin colour is a bit off in the first picture compared to the others.

that's in modelviewer so it dosen't count

Edited:

DatWut? posted:

Oh god!
Female Pyro + Unmasked Pyro.
:ohdear:

lol win

I have mentioned this before but actually have this theory that pyro's real identity is Schlitzie
mainly due to how similar he looks to svld's pyroface, wich btw is very realistic to what his face would actually look like, being a composition of his headshape and the concept.

I mean with pyro's headshape and size he probably has Microcephaly as well as Schlitzie

Other similarities is that Schlitzie gets mistaken for a girl (wich was intentional, "to add to the mystique of his odd appearance")
and pyro is supposed to be stupid right? Try retarded.
Makes perfect sense.

Edited:

huhthewahthe?

munchkin, you can't realease something 2 seconds after you've asked for critique ><

[UberMunchkin]

blaholtzen posted:

munchkin, you can't realease something 2 seconds after you've asked for critique ><

Actually, I was fixing the Promo.

[MaxOfS2D]

Agoat posted:

Yep.

medieval_dooropen.wav is in \team fortress 2\tf\sound\ambient\

That's right, right?

I'm not entirely sure of what I'm saying but I know there's a file that's called modelsounds.cache, it might be causing your trouble

[blaholtzen]

UberMunchkin posted:

Actually, I was fixing the Promo.

oh, well... make those improvements anyway

[Pie_Tony]

Max of S2D posted:

I'm not entirely sure of what I'm saying but I know there's a file that's called modelsounds.cache, it might be causing your trouble

Doubtful.

Why his sound isn't working is an odd one, it works fine for me.

[ned_ballad]

In the model viewer, how do I now make a hat not white?

When I open a hat, it's always white.

[Roninsmastermix]

ned_ballad posted:

In the model viewer, how do I now make a hat not white?

When I open a hat, it's always white.

Is the paintable part white or is the whole thing white? If the paintable part is white, just go to the .vmt file and find the line "$colortint_base" "{"VALUES here based on the color"}". Then add UNDER THAT LINE, "$color2" "{"type here the color you want. ex. 68 48 52"}" You should be able to get colors now. Refer to TF2 wiki site for the paint color codes.

[bigbadrick]

Im going to start work on my "paintable weapon pack"

oh yes, there will be tears.

[pogothemunty]

bigbadrick posted:

Im going to start work on my "paintable weapon pack"

oh yes, there will be tears.

and weapon styles

[psyke]

i'd love to see something little shop of horrors related in TF2.

but i just can't think where it could be aplicable.

i mean. a pocket buddy for engineer of a little planted audrey 2 would be wicked.

[Pie_Tony]

bigbadrick posted:

Im going to start work on my "paintable weapon pack"

oh yes, there will be tears.

So late, I rated you late.

[pogothemunty]

Pie_Tony posted:

So late, I rated you late.

good, now do styles

[install gentoo]

NoNameForEvil posted:

Somebody asked him to just decrease the texture size, and his reply was:


In other words:

Hey, I can understand why you assumed I meant that, but really the point was that most people who have performance problems (including me) are limited by CPU power, not GPU. That means texture size has little to no effect on performance for the majority of players. Edit: Eh whatever, did it anyway while I was fixing some issues with it. Have fun.

[Pako]

StormriderShift posted:

Take off the badge and make it a trophy belt replacement like this picture and I'll love you forever:

Pako posted:

Or maybe an Australian Army badge

:saddowns:

[bigbadrick]

There is a difference between making a picture and releasing a mod tony.

besides I was the first to make a picture of it with the shotgun.

[blaholtzen]

Pie_Tony posted:

So late, I rated you late.

dem compression artifacts

Edited:

bigbadrick posted:

There is a difference between making a picture and releasing a mod tony.

besides I was the first to make a picture of it with the shotgun.

he didn't juat make a gif though, it's actually paintable, though releasing it would be useleass since it needs to be coded into the game in order to actually work...

[Pie_Tony]

bigbadrick posted:

There is a difference between making a picture and releasing a mod tony.

besides I was the first to make a picture of it with the shotgun.

How exactly would you release a mod with paintable weapons?

It can't be done without it being coded in, and robin said styles/painting for weapons is a no no.

[bigbadrick]

Its a mod not something I'm going send to them, and it can be done if its a mod.

[Roninsmastermix]

Heavy badge updated. With careful thought and advice from friends, I decided to take out the hammer & sickle and replace it with the heavy badge instead since that communist logo is still banned from other places. It would have been great but i dont want to touch on sensitivities right now. Finished the texture on the badge and it should be ready to export in TF2 later today. Now its off to make the scout's or pyro's garrison cap. Time to roll the dice!



Of course comments and critiques are welcome.

[Pie_Tony]

Roninsmastermix posted:

Heavy badge updated. With careful thought and advice from friends, I decided to take out the hammer & sickle and replace it with the heavy badge instead since that communist logo is still banned from other places. It would have been great but i dont want to touch on sensitivities right now. Finished the texture on the badge and it should be ready to export in TF2 later today. Now its off to make the scout's or pyro's garrison cap. Time to roll the dice!



Of course comments and critiques are welcome.

So what about the iron curtain and its hammer & sickle?

But It does look really nice actually.

[psyke]

well if the pendant can be paintable. why not >:C

[NassimO PotatO]

Pie_Tony posted:

So late, I rated you late.

I hope it would never happends....

[Roninsmastermix]

Pie_Tony posted:

So what about the iron curtain and its hammer & sickle?

But It does look really nice actually.

It seems that some countries in Europe still ban the use of that symbol. I don't get it too but just to be safe on Valves side and to increase the chance of this getting in, i had to take it out and put the fist in. It turned out satisfactory at best. Lets hope the phong mask helps on this one.

So what do you guys think? Which class should i make a garrison cap next?

[Pie_Tony]

Roninsmastermix posted:

It seems that some countries in Europe still ban the use of that symbol. I don't get it too but just to be safe on Valves side and to increase the chance of this getting in, i had to take it out and put the fist in. It turned out satisfactory at best. Lets hope the phong mask helps on this one.

So what do you guys think? Which class should i make a garrison cap next?

Well in Germany a lot of the new weapons shouldn't be allowed in due to the blood, but valve didn't really care at all.

I doubt it would be any problem at all.

[royaldanney]

Ha! They cencoserd the Ubersaw and the Axtinguisher first, but after those weapons they didn't care anymore. Good job Valve! :buddy: I don't really care at all, because I'm using an uncut patch.

[Eesha]

well, the most easy thing to do is change the blood color to black, like the censored game is.

correct me if i am wrong.

[bigbadrick]

Pie_Tony posted:

How exactly would you release a mod with paintable weapons?

It can't be done without it being coded in, and robin said styles/painting for weapons is a no no.

Well I worked it all out, despite the model viewer acting funny. And it it possible as a mod, but seeing as it would essentially mean each color having its own vmt ( or making the people who download it change the vmt parameter ) I see it is a pointless/work heavy endeavor

[Pie_Tony]

bigbadrick posted:

Well I worked it all out, despite the model viewer acting funny. And it it possible as a mod, but seeing as it would essentially mean each color having its own vmt ( or making the people who download it change the vmt parameter ) I see it is a pointless/work heavy endeavor

Obviously it can be done, as proven by that GIF I made a good couple of months back

It's pointless to release it as a mod though as it wont function ingame properly.
It is a pointless task.

I did it as a joke because of daimao was making paintable hats at the time.

[Gurkenpirat]

Eesha posted:

well, the most easy thing to do is change the blood color to black, like the censored game is.

correct me if i am wrong.

Green blood and sillygibs by default.

[Sharc]

Did the maker of the Old Guadalajara contact you back about the styles? :3:

[ObliteratedEru]

Gurkenpirat posted:

Green blood and sillygibs by default.

Not green blood, but confetti. Yellow and green confetti.

[Pie_Tony]

Sharc posted:

Did the maker of the Old Guadalajara contact you back about the styles? :3:

He still hasn't added me.

[Gurkenpirat]

ObliteratedEru posted:

Not green blood, but confetti. Yellow and green confetti.

That's birthday mode.

[Pako]

Roninsmastermix posted:

With careful thought and advice from friends, I decided to take out the hammer & sickle and replace it with the heavy badge instead since that communist logo is still banned from other places.

I don't think Heavy would've worn that anyways after the Bolsheviks killed his father and deported his family to a Gulag

[Roninsmastermix]

After seeing that the iron curtain hat the hammer & sickle on it, there is no reason for me to not use it anymore. Opened the back-up file and incorporated the texturing i just made on the other version. Quick work that turned out decently.