Good, I was looking at a box set of midcap -74 mags by MAG.
Good, I was looking at a box set of midcap -74 mags by MAG.
Some guns just don't like them, and some people don't like the plastic.
Plastic is good in my case since I have bakelite orange.
A lot of CA guns don't like MAGs I know that. Don't buy from CA is a good solution.
See, the included battery for your gun is a NiCD, aka the worst battery type possible. As they're used, they develop memory, which decreases their battery life and decreases performance. The way you stop excess memory from being created is by discharging the battery after every usage so that it is stored with no power. You'd have to buy a dedicated battery discharger to discharge a battery.
The next step up is NiMH which is basically the same exact thing except that it doesn't create memory, and you can store them charged or uncharged.
The best are Lipos which have significantly greater power and battery life, but if you drain the battery two far, it will ruin the battery.
Give any links please? Just a cheap one that will work well
Okay, got my .20g bbs in. Instant jam in the gun. So I'm going to go pick up some lube later this week.
Detail I noticed: when I remove the mag, there is usually two bbs in the "chamber". Does that point out a particular problem?
Those bb's that fall out are the ones that went out of the mag but not in the hop up. I think it is like that with every gun.
Notrabies what is the usual velocity on your KJW 1911?
Mine is well broken in, so normally right about 300. I think it was closer to 320-330 when it was new.
Ok, that's good. Just right for my field.
YOU ARE THE BEST AROUND!!!!! AINT NOTHIN EVER GONNA BRING YA DOWN! FIGHT TILL THE END CAUSE YOUR LIFE WILL DEPEND ON THE STRENGTH YOU HAVE INSIDE YOU! AH YOU GOTTA BE PROUD STARIN OUT IN THE CLOUDS WHEN THE ODDS OF THE GAME DEFY YOU! TRY YOUR BEST TO WIN THEM ALL AND ONE DAY TIME WILL TELL WHEN YOUR THE ONE THAT STANDING THERE YOU WILL REACH THE FINAL BELL!!!!!!!!!!!!!! OH YOUR THE BEST AROOOOOUND AINT NOTHIN EVER GONNA BRING YA DOWN!
(User was banned for this post ("Off-topic post." - Pascall))
That would seem to indicate something wrong with either the bucking or the air nozzle. Shine a flashlight into the receiver, into the tube where the BBs load, and dry fire. If the nozzle doesn't move smoothly and consistently your tappet plate is unseated. Otherwise the bucking may be improperly installed.
Edit: Unless you just mean two BBs fall out, because that's normal.
Reported for spam.
I am just trying to spread influential music to all you fellow airsofters.
Spam is spam, bro.
I am not trying to spam. If I wanted to spam I could just go "CIALIS AND VIAGRA ONLY $.03 A PILL!!!!!!!!!!!! ACT NOW AT WWW.----------.COM" now that is spam. me giving fellow facepunchers some inspirational music to listen to while facepunching it up is not spam.
In my books, son, spam is posting things for no reason. There are some guidelines.
But there was a reason....inspiration
Irrelevant to the topic at hand...
Usually inspiration makes people think and thinking causes them to have questions. This is the Official Questions thread isnt it? I am trying to inspire people to ask questions.
that's enough, kids
Dude stop.
SO UM WHERE CAN I FIND 6Sh92 VESTS?
stop
Edited:
both of you
Oh, they are? Alrighty then, i might go for those.
fuck last page ninja talking bout mag mags
nowhere
try red-alliance
You cannot find them. The Russians put every single one of them on a rocket ship headed straight for the sun.
Any alternatives (hopefully besides GRAD)?
Tl;dr, all the surplus ones were sold already and they are no longer produced as Russia phases them out with MOLLE vests. However because of this there will be more surplus 6Sh92 variants eventually.
Condor or Pantac need to start making repro Russian stuff. Just like Propper needs to make repro Russian BDUs (and UCP-D).
Anyone help with that?
http://www.airsoftgi.com/index.php?c...t=2a&PLsort=5a
or maybe more specifically
http://www.airsoftgi.com/product_inf...oducts_id=1224
I don't have experience with any of them, but most smart chargers should be good afaik
You use a NiCad battery, you don't need a battery charger, you need a battery discharger like this: http://www.airsoftgi.com/product_inf...oducts_id=5014
A smart charger will help prevent overcharging a battery and its highly recommended you get one eventually, but it will not discharge anything.
All battery needs should be directed here.
http://eliteairsoftbatteries.com/
Fucking bookmarked.
Sorry about that. My cheapo chinese one also discharges, so i made the assumption that almost all of them did
Thanks mate, also bookmarked that website.
I do wonder why they don't include a discharger.
So I got my bullet ants today but something worries me. There a gap in between the bridge of my nose and the goggles, can a BB get through? And how can I eliminate that
Depends how big it is, Just grab a BB and try holding it up to it and try to push it through. And try it at angles too. If not if that's a replacement you may be able to cut the material from your old goggles and hot glue it over.
Also, is it intentional?