1. Post #1
    Gold Member
    Foosili's Avatar
    January 2005
    7,707 Posts
    I claim this thread for krundle in the name of united airsoft postal service

    Edited:

    Also Jesus Christ I need to focus on my guns and less on gear. But how can I pass up all this rossia gear
    Reply With Quote Edit / Delete Show Events Winner Winner x 1Funny Funny x 1Agree Agree x 1 (list)

  2. Post #2
    Gold Member
    Instant Mix's Avatar
    October 2006
    3,885 Posts
    Can someone explain why airsoft rifles have "MOSFETS"
    I know they are 2v transistors but I've no clue what use they could have in airsoft weapons
    Reply With Quote Edit / Delete Windows 7 United Kingdom Show Events

  3. Post #3
    Jat Goodwin's Avatar
    August 2008
    931 Posts
    FOR TOPIC OF DISCUSSION:
    Why doesn't anybody in the US carry good parts and I have to order crap from hong kong.

    Edited:

    Can someone explain why airsoft rifles have "MOSFETS"
    I know they are 2v transistors but I've no clue what use they could have in airsoft weapons
    shifts the current from the trigger contacts to reduce wear and other things.
    Reply With Quote Edit / Delete Windows 7 United States Show Events Informative Informative x 1 (list)

  4. Post #4
    Psycoace2's Avatar
    July 2010
    1,031 Posts
    I'm never buying a front wired M4 again without a crane stock and rear wiring kit.

    Edited:

    Such a pain in the ass.
    Reply With Quote Edit / Delete Windows 8 United States Show Events

  5. Post #5
    No such thing as overkill.
    catbarf's Avatar
    January 2007
    7,995 Posts
    shifts the current from the trigger contacts to reduce wear and other things.
    So, is it basically re-wiring the gun so the battery and motor are in a circuit with the MOSFET, and the trigger switch is connected solely to the MOSFET? I'm not sure if my 60 can use one, it already has a parallel circuit to drive the ammo box.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  6. Post #6
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    I like this thread title.
    Reply With Quote Edit / Delete Windows 7 United States Show Events Agree Agree x 5 (list)

  7. Post #7
    Gold Member
    Foosili's Avatar
    January 2005
    7,707 Posts
    MY ROSSIA GEAR ENTERED THE Соединенные Штаты Америки!

    wOOOOOOOOOOOOO
    Reply With Quote Edit / Delete Windows 7 Show Events

  8. Post #8
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    4,000 more likes until ASGI gives away a Kriss.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  9. Post #9
    your all nerdes
    the_killer24's Avatar
    November 2007
    14,134 Posts
    waiting for my t-shirt with free cyma rpk

    hnnnnggggg
    Reply With Quote Edit / Delete Windows 7 United States Show Events Funny Funny x 5 (list)

  10. Post #10
    ಥ益ಥ ... Beautiful.
    Kill001's Avatar
    April 2006
    12,077 Posts
    I want them to give away a free pkm

    I'd rock the shit outta my spets loadout
    Reply With Quote Edit / Delete United States Show Events Agree Agree x 2Winner Winner x 1 (list)

  11. Post #11
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    Should I get Ebairsoft Gear or Pantac when I do my PMC loadout? Because Ebairsoft is infinitely cheaper and I can have a full, complete loadout in like one order for no money at all.

    Pantac is much more expensive but I guess the quality is better, resale value is better and I dunno. Coloration is a huge consideration in this shit.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  12. Post #12
    child porn prodigy
    venom's Avatar
    April 2005
    15,333 Posts
    I've always thought this would look awesome for a PMC loadout
    http://www.weaponblender.com/index.php?productID=2230

    rock that with a some hip or thigh mag pouches and you'd be pretty hispeed lodrag
    Reply With Quote Edit / Delete Windows Vista Canada Show Events

  13. Post #13
    iFail's Avatar
    March 2009
    2,449 Posts
    Reply With Quote Edit / Delete Windows XP Taiwan Show Events

  14. Post #14
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    Reply With Quote Edit / Delete Windows 7 United States Show Events Funny Funny x 1 (list)

  15. Post #15
    Dumpster Duke
    Back_Slash's Avatar
    July 2009
    12,371 Posts
    Shipping out my M16A4 tomorrow
    got 120 for it.
    Obviously he loved my engraving
    Reply With Quote Edit / Delete Windows 7 United States Show Events Funny Funny x 7Winner Winner x 3 (list)

  16. Post #16
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    Wow this site is great. It's like Ebairsoft but with an annoying BANG BANG noise when you hover over the top categories.

    Debating if I should get an S&T Tavor and do what was suggested earlier and see if my local tech can fit the shorter barrel on my the ARES version and than sell the S&T with longer barrel but meh.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  17. Post #17
    Gold Member
    Jenkem's Avatar
    June 2009
    2,622 Posts
    Should I get Ebairsoft Gear or Pantac when I do my PMC loadout? Because Ebairsoft is infinitely cheaper and I can have a full, complete loadout in like one order for no money at all.

    Pantac is much more expensive but I guess the quality is better, resale value is better and I dunno. Coloration is a huge consideration in this shit.
    Ebairsoft fo sho.

    Pantac is real operator-quality, TMC gear is generally about on par with Condor except made of Cordura are less sucky representations of real equipment (the Condor 6094 doesn't even have a kangaroo pouch, which is blasphemy). Unless you plan to completely trash your vest, choose Ebairsoft/TMC (NOT weekend warrior though) and you should do fine. I plan to buy one of their vests when I can get an extra $65.
    Reply With Quote Edit / Delete Windows Vista United States Show Events

  18. Post #18
    Year_of_Lurking's Avatar
    June 2009
    465 Posts
    Debating if I should get an S&T Tavor and do what was suggested earlier and see if my local tech can fit the shorter barrel on my the ARES version and than sell the S&T with longer barrel but meh.
    I'd vote a barrel swap, or somehow change/shorten the barrel on your current tavor.
    Either way I know I wouldn't want to be stuck with the S&T tavor. lol plastic internals, and ugly, cheap-looking, plastic externals.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  19. Post #19
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    If the S&T retails for like $180 than I can maybe get $150 for it after it's been 'used' and the longer barrel is put on it. Not a huge return, but it's about the same as buying a new barrel assembly for an M4 I guess.

    Also why ugly? The S&T looks like oily plastic in the pictures but in person it's got a decent finish.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  20. Post #20
    Caboozer's Avatar
    July 2011
    188 Posts
    Parts for my tanaka are coming i am excite!
    Reply With Quote Edit / Delete Windows 7 United States Show Events Winner Winner x 2 (list)

  21. Post #21
    Dumpster Duke
    Back_Slash's Avatar
    July 2009
    12,371 Posts
    The paypal payment won't go through unless I add a tracking number and all that jazz.
    Also it has to arrive and three days has to pass.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  22. Post #22
    Year_of_Lurking's Avatar
    June 2009
    465 Posts
    Also why ugly? The S&T looks like oily plastic in the pictures but in person it's got a decent finish.
    I've only seen it in pictures so I was just going off that.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  23. Post #23
    Gold Member
    FloaterTWO's Avatar
    November 2008
    7,180 Posts
    I love airsoft guns.

    M14 shoots like shit and range is terrible due to the hop being fucked. I take it apart, check hop unit, poke it and prod it and find it's working perfectly, put it back together exactly how i found it, now it shoots for miles and has the legendary range i was told it had when i bought it.

    Makes complete sense.
    Reply With Quote Edit / Delete Windows 7 United Kingdom Show Events Winner Winner x 1 (list)

  24. Post #24
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,813 Posts
    So, went to the field sunday, my friend sold me his 3 year old JG G36c for $20. I feel bad though because I wanted to buy Notrabies' stuff, had to dump money into gun and car and other stuff at the time, then bought a G36c from my friend:c
    It was broken (broken hop up bracket nubs), so I put my XM8's bracket in and now it fires.
    I feel bad though, but it was only $20 :c
    Reply With Quote Edit / Delete Windows Vista United States Show Events

  25. Post #25
    Shotgun Guru
    notrabies's Avatar
    February 2009
    7,349 Posts
    So, went to the field sunday, my friend sold me his 3 year old JG G36c for $20. I feel bad though because I wanted to buy Notrabies' stuff, had to dump money into gun and car and other stuff at the time, then bought a G36c from my friend:c
    It was broken (broken hop up bracket nubs), so I put my XM8's bracket in and now it fires.
    I feel bad though, but it was only $20 :c
    Price raised to $270.
    Reply With Quote Edit / Delete Windows 7 United States Show Events Funny Funny x 3Zing Zing x 2 (list)

  26. Post #26
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    I wish I could find a broken meprolight sight. It'd be a nice touch on my Tavor/M4.

    Also S&T Tavor doesn't look -that- bad.

    Reply With Quote Edit / Delete Windows 7 United States Show Events

  27. Post #27
    your all nerdes
    the_killer24's Avatar
    November 2007
    14,134 Posts
    I'd buy it just to have a tavor but i could buy other things with $180
    Reply With Quote Edit / Delete Windows 7 United States Show Events Agree Agree x 3 (list)

  28. Post #28
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,813 Posts
    Price raised to $270.
    It's not like i'm not going to buy your stuff in the spring
    When I bought this one, I was mainly thinking about putting the gearbox into the XM-8 shell I have sitting around, i've been planning to buy a gearbox for it since April.
    I still feel bad about pulling out of the deal before, but my parents were pressuring me into putting money into my car, so I did it now instead of later so i'd have a car to drive this summer, instead of waiting all summer to pay for it, which would suck.
    Reply With Quote Edit / Delete Windows Vista United States Show Events

  29. Post #29
    Gold Member
    TehG3A3's Avatar
    November 2007
    2,221 Posts
    snip
    Reply With Quote Edit / Delete Windows 7 United States Show Events Agree Agree x 1 (list)

  30. Post #30
    Shotgun Guru
    notrabies's Avatar
    February 2009
    7,349 Posts
    I'm fucking with you bro, I know how life gets in the way of airsoft. I just spent like $350 that I don't really have to fix my camaro. In 3 weeks I'll be set, but I'm down to like $50 after paying bills this month.
    We cool.
    Reply With Quote Edit / Delete Windows 7 United States Show Events Friendly Friendly x 2 (list)

  31. Post #31
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,813 Posts
    lmao, it's too bad the internet kills any emotion from text :V
    Yeah, i'd jump on it now, but I just dropped over $700 on my car, needs more dropped into it too.
    Plus I have to buy some shit for OP: Red Storm in April (it's a few months from now so that won't be too hard on me right now), plus gunparts I have yet to order
    Sweet camaro btw, get the coolant problem fixed? (newfeedcreepinglol)
    Reply With Quote Edit / Delete Windows Vista United States Show Events Agree Agree x 1 (list)

  32. Post #32
    your all nerdes
    the_killer24's Avatar
    November 2007
    14,134 Posts
    i really want some bullpups now

    dunno why
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  33. Post #33
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,813 Posts
    In other news, I have the midcap from the XM8 i'm going to see if I can mod it to fix the JG, you can buy two of them for $10 in Dick's Sporting Goods, lol. Not the best quality but I believe they feed okay, plus they're p. cheap for G36 midcaps.

    Edited:

    I've been fighting the AUG urge for too long, I want to get one a year or two from now.
    Reply With Quote Edit / Delete Windows Vista United States Show Events

  34. Post #34
    Shotgun Guru
    notrabies's Avatar
    February 2009
    7,349 Posts
    lmao, it's too bad the internet kills any emotion from text :V
    Yeah, i'd jump on it now, but I just dropped over $700 on my car, needs more dropped into it too.
    Plus I have to buy some shit for OP: Red Storm in April (it's a few months from now so that won't be too hard on me right now), plus gunparts I have yet to order
    Sweet camaro btw, get the coolant problem fixed? (newfeedcreepinglol)
    Wait, is that the one in Pennsylvania? My CQB arena's staff is going and I may join them. Its almost entirely indoors in a factory, so we're gonna win.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  35. Post #35
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,813 Posts
    Yeah, the Scranton Lace factory, going with the owner of HVA and some of our buddies on the Russian team, I think it's going to be a ton of fun, my first huge OP.
    Reply With Quote Edit / Delete Windows Vista United States Show Events

  36. Post #36
    POLITICAN
    CubeManv2's Avatar
    August 2008
    7,387 Posts
    Am i the only one who kinda hates the stupid titles after the names of the threads. I mean simple ones are okay but some of them are just dumb and pointless
    Reply With Quote Edit / Delete Windows 7 United States Show Events Agree Agree x 1 (list)

  37. Post #37
    Gold Member
    Foosili's Avatar
    January 2005
    7,707 Posts
    Am i the only one who kinda hates the stupid titles after the names of the threads. I mean simple ones are okay but some of them are just dumb and pointless
    I feel dirty now
    Reply With Quote Edit / Delete Show Events

  38. Post #38
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    Annnnd the S&T Tavor has been released on ASGI God damn it looks good. I'm tempted to order it this instant but I think I should wait until I've assembled all my money around Friday. I have like $1,250 right now but by Friday that figure will look more like $1,600-$1,700.
    Reply With Quote Edit / Delete Windows 7 United States Show Events

  39. Post #39
    YEAH, AND?
    felix the cat's Avatar
    December 2010
    9,532 Posts
    Annnnd the S&T Tavor has been released. God damn it looks good. I'm tempted to order it this instant but I think I should wait until I've assembled all my money around Friday.
    If you didn't roll the nickels I'd say you're wasting alot of money buy buying that S&T
    Reply With Quote Edit / Delete Mac United States Show Events Funny Funny x 1 (list)

  40. Post #40
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    18,070 Posts
    If you didn't roll the nickels I'd say you're wasting alot of money buy buying that S&T
    Option A. Switch out the barrels. ARES is fixed, sell the S&T.
    Option B. If not possible, sell ARES, make profit, break even with S&T purchase and have a prop/planking rifle for my IDF impressions. Awesome gun to have on my rack.

    It's still a pain in the ass. All this effort over a barrel I can't swap out. I wish I could just buy the original TAR 21 somewhere and be content but no one is selling them used either.

    The last option is to wait for the ARES short barrel, railed version and god knows when it'll come out.
    Reply With Quote Edit / Delete Windows 7 United States Show Events