[TacticalHijack]

Oh God I think I might. Does anyone know the approx. release date of the TM Series 70?

[felix the cat]

Think about this:
That WA will never be in stock at any retailer ever again. When they were still in production WA Pro Killers were among the most sought after pistols on the market. Plus iirc the Pro Killers run on the old Magna system which is one of the most reliable and hard hitting GBB systems ever devised.

The TM will be around forever.

[TacticalHijack]

OK I think I will.
PM'ed the guy.

You should have just told me this. "Do you want to take a leap of faith? Or become an old man, filled with regret waiting to die alone."

[venom]

I.. Don't understand this thread's title.
What is it a reference to?

[DarkZero135]

venom posted:

I.. Don't understand this thread's title.
What is it a reference to?

Jenkem worst title maker all time

[Mbbird]

I think it's reference to new people coming in and 9 out of 10 of us telling them to buy AKs lol.

[Crash15]

Mbbird posted:

I think it's reference to new people coming in and 9 out of 10 of us telling them to buy AKs lol.

i am a new people

[Mbbird]

Crash15 posted:

i am a new people

I am just a people.

[Back_Slash]

Crash15 posted:

i am a new people

let me tell you about what gun you should buy.

_{you should buy a G3}

[Dark Descent]

OKay I realligned all the gears, cleaned out the gearbox, why the fuck is the motor pulling the gears but not releasing them and making this horrible screeching noise. I'm so fucking done with this bullshit, how do I fix this.

[Jat Goodwin]

not releasing them?

What?

Also that screeching is because you didnt shim correctly or adjust the motor height correctly.

[Dark Descent]

Like the gears turn then stop at a certain point and don't release the piston. The tappet plate was like being bent by the gear that pulls it back. SO i understand the bad shimming but how do I adjust the motor height, I have no clue how to do that on my gun.

[FloaterTWO]

If it's an AK then it should have a screw on the bottom of the motor cage in the grip, try twisting the screw so it's not forcing the motor in so hard?

[Dark Descent]

The screw at the bottom just attaches the grip to the motor, it's not long enough to force the motor up

[FloaterTWO]

I've honestly never seen a V3 gearbox in person since all my guns and my brothers guns have been ARs with V2 gearboxes, but i would've thought there would be something in the base of the grip/motor cage to adjust the height of the motor.

Going out on a limb, you aren't using a long shaft motor or something when you should be using a short one?

[Dark Descent]

Nope, motor that came with the gun

[FloaterTWO]

Huh, not sure, then.

All i know is that there should be a screw to adjust motor height, are you sure there's nothing in there?

If you take the motor out and look into the base of the motor cage (if i'm assuming it's a V3 gearbox and it's not then correct me here, i thought all AKs use V3 boxes), can you see any way of adjusting anything?

[Dark Descent]

There's the threading for where the grip screw goes in and on the sides there are screws to take apart the motor cage

[Year_of_Lurking]

On the bottom of the motor cage there's a hole. You put an alan key in and turn

[Dark Descent]

Thank you. Is that all I need to do to fix this damn gun, pls say yes

[Year_of_Lurking]

It should at least fix the screeching noise of the motor and bevel gear not connecting. I'm not sure if anything else is wrong.

[deathmog]

there's a DE single shot shotgun that was bought off Ebay, and with .30's, it shoots so fucking far, it's incredible, I got a headshot with it at like 200 feet (unintentional headshot though, was aiming for the chest, aimed a little too high I guess)

[JimmyA]

Got my S&W 40F today, but the inner barrel is a bit wobbly, how do I fix this?

[Jat Goodwin]

Dark Descent posted:

Like the gears turn then stop at a certain point and don't release the piston. The tappet plate was like being bent by the gear that pulls it back. SO i understand the bad shimming but how do I adjust the motor height, I have no clue how to do that on my gun.

check the aoe.

Edited:

JimmyA posted:

Got my S&W 40F today, but the inner barrel is a bit wobbly, how do I fix this?

shim it.

[JimmyA]

Jat Goodwin posted:

check the aoe.

Edited:



shim it.

how exactly do i shim a CO2 pistol?!

[Jat Goodwin]

no you shim the barrel to make it tighter. Shimming isnt something exclusive to airsoft gears >:C

[the_killer24]

i'd assume put spacers around the barrel so it doesnt wobble

Edited:

imlate

[Dark Descent]

JimmyA posted:

how exactly do i shim a CO2 pistol?!

Tape around the barrel, even I could figure it out

[10050]

How is KJW? This model in particular: http://www.evike.com/product_info.ph...ducts_id=35275

I'm looking for a good silver gun. I really want a single stack 1911, but they're too unreliable from what I've been told.

[TheDon]

http://www.evike.com/product_info.ph...ducts_id=32630
I've narrowed it down to this european pistol as my next gun.
Agree for good choice.
Disagree for me to keep looking.

[the_killer24]

10050 posted:

How is KJW? This model in particular: http://www.evike.com/product_info.ph...ducts_id=35275

I'm looking for a good silver gun. I really want a single stack 1911, but they're too unreliable from what I've been told.

KJW M9s are great

[notrabies]

So long as its not single stack or a glock, KJW's are made of magic and dreams.

[Dark Descent]

You want tm or wa for single stacks. Or you could be an idiot like me and get a WE as a project gun

Edited:

TheDon posted:

http://www.evike.com/product_info.ph...ducts_id=32630
I've narrowed it down to this european pistol as my next gun.
Agree for good choice.
Disagree for me to keep looking.

It feels cheap and plasticy. I really don't like it. Try for ksc

[Psycoace2]

notrabies posted:

So long as its not single stack or a glock, KJW's are made of magic and dreams.

Hm? I love my friend's KJW G27. Then again, it's the only GBB I've handled.

[Year_of_Lurking]

Dark Descent posted:

Edited:
It feels cheap and plasticy. I really don't like it. Try for ksc

The ksc is actually plastic though lol. Although the kwa is aluminum mixed with mystery metal it is a pretty good buy. Mine is on par with every other pistol I've seen, performance wise. Only thing I kinda hate is that most of the weight is in the mag. and of course shitty kwa trades.

[felix the cat]

Year_of_Lurking posted:

The ksc is actually plastic though lol. Although the kwa is aluminum mixed with mystery metal it is a pretty good buy. Mine is on par with every other pistol I've seen, performance wise. Only thing I kinda hate is that most of the weight is in the mag. and of course shitty kwa trades.

The KSC is actually only plastic on the Japan market version.
You can get the Taiwan version
http://www.uncompany.com/pageproduct...p?prodid=27114

I'm overall unimpressed by KWAs. They feel cheap and plasticy which is ironic because my WA felt more real in it's stock plastic form.

[Year_of_Lurking]

Fuck I didn't know about the Taiwanese version. You're really making me regret the kwa, but it's too late now anyway.

[felix the cat]

Hey Jomt, didn't you say before that you could get M90 Camo?

[Stupideye]

yeah I have a metal KSC G18c. its fucking great

[Taepodong-2]

Stupideye posted:

yeah I have a metal KSC G18c. its fucking great

Sell it to me so I can laugh at my friend who broke his.