Register
Events
Popular
More
Post #6161
If it's an original, of course.WW2 German Colt Kongsberg
Should I buy one like these? I really like it.
M1911s are always fun.
-
-
I tried to pay a prostitute for a hug, but she turned me down because I'm a huge faggot.
July 2010
2,482 Posts
Yeah it's an original. I like the history behind it.
-
HATE SPEECH SHOULD BE LEGAL NO EXCEPTIONS - I AM RIGHT 100% OF THE TIME AND DEFEND POINTS LIKE A RABID NECKBEARD
May 2008
13,198 Posts
Can anyone help me with this? I don't really want to pay a gunsmith to do this for me, but I'd like to get the stock replaced.
-
The actual nazi ones are really rare. only 920 or so of them. The regular model 1914s aren't quite as rare.
-
I tried to pay a prostitute for a hug, but she turned me down because I'm a huge faggot.
July 2010
2,482 Posts
Well the same guy is selling a Kriegsmarine version of it, only 180 pcs ever made. But I think I'm going for the wehrmacht one.
-
As far as I can tell it's just a screw that holds the stock onto the trunion. If you have already removed the screw then I would imagine you just need to put more elbow grease into it... other wise I don't fuckin' know.
-
HATE SPEECH SHOULD BE LEGAL NO EXCEPTIONS - I AM RIGHT 100% OF THE TIME AND DEFEND POINTS LIKE A RABID NECKBEARD
May 2008
13,198 Posts
Yah, I got it unstuck now, had to coat it in some remoil lube and take a hammer and screwdriver to it, it eventually came out. Got my SSAK slidefire stock installed, now to just take it to the range.
-
You can tell it's German because the serial number is stamped on every partWW2 German Colt Kongsberg
Should I buy one like these? I really like it.
-
check the bullets, I bet they've all got .854 on them too
-
Too bad its Norwegian.
-
It's Norweigan alright, and I don't see any stamps of the germans re-issuing this one to others.
-
Considering saving up the cash to buy a Ruger SR-556, anyone got an opinion on the things?
I don't have a real good 'modern' rifle and would like to have a piston AR of some kind.
Course if I get one I'm gonna be carving some wooden grips for the pistol grip and lower/side rails, gun has got to have some wood on it.
-
uhm how is that german???
it's a kongsberg manufacture without any waffenampt stamps
it's a regular kongsberg, made in norway and used by norwegians
-
that was a joke
-
It's a joke, fuck
Edited:
Anyway, I assumed it was German as the poster said it was
-
Does anyone know what the world record for fastest muzzleload reload is?
-
No idea, but I tought I'd post this:
That shotgun is single-shot and the revolver is single action.
-
I thought this would be the best place to ask for opinions, I'm thinking of writing a thread with a series of extremely detailed posts on a few WW2 topics, as in, stuff the average "i played cod2 and CoH" guys wouldn't know about but would still hopefully find interesting. First topic would be US armour and TD doctrine/the Panther Crisis.
Good idea or will it be lost under a wave of "lol tiger is da bestest tank"?
-
I tried to pay a prostitute for a hug, but she turned me down because I'm a huge faggot.
July 2010
2,482 Posts
Yeah apparently it isn't german because the waffenamts are missing, guess I'll skip this one, the chance that it was used by the wehrmacht is rather high though since it was manufactured in 1941 and the wehrmacht even used Norwegian uniforms.
-
From what I've read out of the box they have a crap trigger (stiff and somewhat unpredictable), changing out the trigger is going to be on the agenda. And also from handling them they do feel front heavy. Other than that, they seem to be really good.
-
HATE SPEECH SHOULD BE LEGAL NO EXCEPTIONS - I AM RIGHT 100% OF THE TIME AND DEFEND POINTS LIKE A RABID NECKBEARD
May 2008
13,198 Posts
you can expect a few mindless idiots to come into the thread and talk directly out of their asses, just like mr. "full auto deagle" guy we had in this thread a while back. Go for it.
-
There may not be an official record for it, and unless you set a standard gun to reload like a Brown Bess some guns can be reloaded faster than others just by virtue of their design or be reloaded with different methods such as pellets instead of loose powder or even paper cartridges instead of a measure.
Takes me around 30-40 seconds to reload my big Matchlock, never timed myself with it and I don't like to do sustained firing with it due to the possibility of the charge going off prematurely while reloading in such a big bore.
But someone using a Wheellock or any of the different Flint mechanisms would get a better reload speed than me because I have to remove my Match each time I go to reload.
Yeah I heard about that, the trigger is new to me though but it can't be worse than my Martini Henry, that thing has about a 20 pound trigger pull that downright hurts when it finally lets go and between my Garand and my Matchlock which weighs more than 26 pounds and is also more than a little front heavy I'm used to heavy guns, the SR-556 would probably feel like a toy in comparison.
-
Went shooting first with my class today, then with my Homeguard Youth leader.
Was a fun day overall.
My Contender has some issues, like locking and the rear keeps becoming unstable.
But when I shot the AG-3 (Norwegian G-3) I had no issues with it. It's a delicious rifle to shoot.
-
i don't even see the point of a contender
-
I don't see the point of a de-activated nugget.
(please don't turn this argument)
-
While I'd personally never buy one, the idea of the Contender is neat. Quick swaps of barrels and you've got yourself a different firearm. Let the man have his fun.
-
-
You really don't understand the point behind owning a firearm for the sake of having it as a hobby, you know, to have fun.
-
Guns like a Contender are like Go-Karts, useless for most things but lots of fun to play around with if that's what you enjoy.
-
First part is up. http://www.facepunch.com/showthread.php?t=1191164
-
I don't see the point of a de-activated nugget.
(please don't turn this argument)
OMG ICE BURN!!!!!!!!!!!!!
what's the point of a single-shot firearm that uses a horrible system for reloading, is made out of low quality metal by a MURRICA STRONG company and is just painful to look at?
-
-
Whoa, what?
-
-
-
-
I'm pretty sure the boresnake will work just fine. It seems the primary point of concern is diameter, which matches in this case.
-
DSA FAL
Anyone heard of these guys (DSA, not Aim Surplus)? I've been dying for a FAL since the day I first laid eyes on one, and I can finally afford one now.
-
An ad for a local sporting goods store called the 10/22 a shotgun.
-
Hmm... nah.
Agree x 2
Informative x 1
Funny x 28
Zing x 2
Dumb x 7
Optimistic x 1
