[Neoswords123]

Do you guys prefer .23 or .25 for outdoor airsoft on a okay day? I was wondering because I just aquired 60 bucks and want to get some more BB's, and was wondering which I should get for my AKS-74U

[Dark Descent]

.25 or .28

[FPKawaii]

.25 god tier

[felix the cat]

.28s or .3s

[Stupideye]

I use .3

[felix the cat]

Which reminds me, my furthest shooting gun is my M4. Which is funny because it's only shooting ~260ish with .28s and the hop up chamber and bucking are completely stock, not-to-mention about 4 or 5 years old, and of the old-style Echo 1/JG 2-piece variety.

Somehow this thing shoots over 200 feet.

[Psycoace2]

What size o-rings should be used on KJW 1911 mags? I'm fixing two for a friend.

[felix the cat]

for which part of the mag?

[Psycoace2]

I *think* it's the fill valve, but he's just told me this over Facebook, so I'm going off of nothing here.

[Wulfram]

I was thinking about using .3s next time I go out.

[deathmog]

My brother held the Elite Force 1911, and supposedly him and some store guys said it was surprisingly not bad.

[FPKawaii]

Why would you use above .28s? Your bbs are just stupidly slow and easy to dodge.

[felix the cat]

Psycoace2 posted:

I *think* it's the fill valve, but he's just told me this over Facebook, so I'm going off of nothing here.

If it's the fill valve you'll need these http://www.amazon.com/002-Silicone-O.../ref=pd_ybh_22

Edited:

FPKawaii posted:

Why would you use above .28s? Your bbs are just stupidly slow and easy to dodge.

With my 10/22 if I use anything less than .32s the bbs go sky high after like 50 feet.

[notrabies]

Psycoace2 posted:

What size o-rings should be used on KJW 1911 mags? I'm fixing two for a friend.

Protip, I think he's just encountering the 1911 single stack + metal slide issue. I have the same thing, I thought it was the mags, but its just the gun to my knowledge.

[zezsniper]

Ok so I got these p mags, and every time I shoot my g&p m4 it seems like every one comes loose and i have to push the mag into the well a little, and it clicks. Are the mags just shit? Becsuse the mag that came with my gun feeds perfectly, and they used to feed just fine.

[the_killer24]

what brand are the pmags

because if they're beta project they're supposed to be incredibly bad

[JoonazL]

the_killer24 posted:

what brand are the pmags

because if they're beta project they're supposed to be incredibly bad

my beta projects were perfect until i fucked with the mag release and it still feeds fine but wobbles
before fucking with mag release they were rock solid

[Zerokateo]

zezsniper posted:

Ok so I got these p mags, and every time I shoot my g&p m4 it seems like every one comes loose and i have to push the mag into the well a little, and it clicks. Are the mags just shit? Becsuse the mag that came with my gun feeds perfectly, and they used to feed just fine.

With my G&P I had to "Break in the mag catch" I basically had to slam a few mags in about 60 times and then my MAG and Pmags worked.

[JoonazL]

Anyone have any experience with the Cm031 or should I just save for Cm048

Wait, fuck that, G&G L85A2 here i come

[Psycoace2]

notrabies posted:

Protip, I think he's just encountering the 1911 single stack + metal slide issue. I have the same thing, I thought it was the mags, but its just the gun to my knowledge.

Well his issue is all of the gas is expelling as soon as he puts it in the mag, has nothing to do with the gun afaik.

[Year_of_Lurking]

Is there anywhere I can get a smooth receiver cover for my ak74m? I know some brands like vfc have it stock.

[felix the cat]

Psycoace2 posted:

Well his issue is all of the gas is expelling as soon as he puts it in the mag, has nothing to do with the gun afaik.

He has a problem with his valve knocker.

[Tailsmaster99]

My UTG Accushot Shadow Ops sniper rifle's magazine has a bad problem. When I shoot, the rods in the magazine come out some and it gets really difficult to get them out of the magwell, far enough that I almost had to field strip. Does anyone know why?

[Jesus Puncher]

I am looking to get a shell ejecting gas shotgun. I've been looking at Maruzen models, do they take propane?

[notrabies]

Jesus Puncher posted:

I am looking to get a shell ejecting gas shotgun. I've been looking at Maruzen models, do they take propane?

First, how experienced are you with gas guns?

[Jesus Puncher]

notrabies posted:

First, how experienced are you with gas guns?

Own 3, 7 if you count shitty nbb co2 guns.

Let me rephrase my question, is the Maruzens built for hfc or can they handle propane?

[notrabies]

Jesus Puncher posted:

Own 3, 7 if you count shitty nbb co2 guns.

Let me rephrase my question, is the Maruzens built for hfc or can they handle propane?

They can handle CO2 if you know what you're doing. It really depends on which model. I've written up a lot of posts in a lot of places, so trying searching for them.

[zezsniper]

Ok, if I do end up getting mags, which ones should I get? I prefer mid cap m4 mags, I do love the magpul p mag look, but these beta project ones are said to be shit. I would prefer to get a box set.

Also, http://www.evike.com/product_info.ph...ducts_id=28397

Good/bad?

[JimmyA]

snip

[the_killer24]

zezsniper posted:

Ok, if I do end up getting mags, which ones should I get? I prefer mid cap m4 mags, I do love the magpul p mag look, but these beta project ones are said to be shit. I would prefer to get a box set.

Also, http://www.evike.com/product_info.ph...ducts_id=28397

Good/bad?

mag brand mags

they come in boxes of 8 for like $60

[/Vandy/]

I bought a CM048M around 3 months ago. I am completely satisfied with its performance, however it is EXTREMELY finicky with magazines. I had the original magazine and an echo 1 hicap, both of which would not lock in the magwell after a month or so of use. I traded one hicap for two midcaps, which are getting tight in the magwell as well. I traded the other hicap for a different style plastic waffle hicap, which barely seats in the magwell. I'm at a loss. Any pointers?

Thanks in advance

To clarify, the mags will fit one day, and won't fit the next.

[Zerokateo]

The beta project mags aren't bad at all.

[felix the cat]

/Vandy/ posted:

I bought a CM048M around 3 months ago. I am completely satisfied with its performance, however it is EXTREMELY finicky with magazines. I had the original magazine and an echo 1 hicap, both of which would not lock in the magwell after a month or so of use. I traded one hicap for two midcaps, which are getting tight in the magwell as well. I traded the other hicap for a different style plastic waffle hicap, which barely seats in the magwell. I'm at a loss. Any pointers?

Thanks in advance

G&P midcaps are the absolute best mags you can get. I used to have a CM048 and I used them without a problem for over a year.

[Psycoace2]

Will this fit in a Cyma M14?

[notrabies]

Almost certainly, I used the same size pack in my CA M14 with room to spare. If it goes in the stock, you should be totally fine.

[Wulfram]

http://www.evike.com/product_info.php?products_id=34449
or
http://www.evike.com/product_info.ph...ducts_id=34434
for
http://www.evike.com/product_info.php?products_id=37350

[JimmyA]

buy SURPLUS HOLSTER

[CodeMonkey3]

First one. Universals look better and are far more practical. You can adjust how high or how low it sits, where it sits, use it for other pistols and it has thumb break button and a velcro safety for retention as well.

[Wulfram]

CodeMonkey3 posted:

First one. Universals look better and are far more practical. You can adjust how high or how low it sits, where it sits, use it for other pistols and it has thumb break button and a velcro safety for retention as well.

Thanks. Going to order later.

[/Vandy/]

felix the cat posted:

G&P midcaps are the absolute best mags you can get. I used to have a CM048 and I used them without a problem for over a year.

Thanks, I'll try those! Also, stupid question, is the CM048M different than the CM048, or is it just a different mag and flash hider. I feel at home here with all the other CYMA AK owners