Register
Events
Popular
More
Post #281
Thanks a bunch man
-
-
Just got my CQB Master Hi-Capa today! :D It shoots very nicely, has a hard kick, but the slide doesn't seem to lock back on the last shot. Anyone got any ideas on why? Might be just the lever thing.
-
Are you holding the slide release (lever thing) with your thumb as you fire? I used to do that accidentally.
-
I'd like to get a bandoleer for M14 mags. Anyone know of any decent ones?
While I'm at it, I'm interested in some CYMA M14 midcaps as well.
-
Could be a loose screw on the bottom of the slide causing some friction. Just strip it and tighten them if that's the case.
-
Nope. Not even touching it.
-
Look for King Arms M14 Micap box sets, they're only like $25 at AEX.
-
Well I left the hammer back while taking the pin that holds the mag well on, and the thing in the back of the handle sprung down and this little metal silver thing came out. I put it back without the silver thing and now the trigger doesn't move. Please help, I don't know how to fix this! Will I be able to send it back? I'm really sad, my gun is broken and it's only my 2nd day having it. :smith:
-
Nevermind I fixed it.
-
Oh lol. ^
-
I'm building probibly one of the most expincive airsoft loadouts ever.
I am going to turn a caw revolver grenade launcher and and a bunch of abs pipe and crap into a large arm mounted "shotgun" (from the caw) and rocket launcher (nerf rockets, abs pipe) but I am facing problems with how it will work.
I want my arm in the middle on some form of a single hand trigger for both weapons because it is arm mounted. and I will have to carry compressed air or co2 or something for the nerf rockets. I was thinking just take abs pipe and build a back mounted container and use compressed air with a psi valve and a "bike tube valve" but carry it in a large pack form like three or four pipes wide. but how do I connect that to the arm mounted cannon? I was thinking some sort of tube but I don't know what kind. and I have no idea how to wire a trigger to only release so much gas at once. help is appriciated, thanks. I also plan to mount the caw right side up on the rails so I can remove it easily.
-
^
good luck. why would you want that anyway? thats kind of useless.
-
My loadout.
take at look at these.
I do both sports so I know I can trust the site for my balistic protection.
I also will buy a tinted shield for the gasmask.Code:http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=3410314L&store=Main&catId=&productId=p3410314&leafCatId=&mmyId= http://www.qm-supply.com/zenstore/index.php?main_page=product_info&cPath=3&products_id=54 http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=356975128&store=Main&catId=&productId=prod2670286&leafCatId=&mmyId= http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=&store=Main&catId=&productId=p3409503&leafCatId=&mmyId= http://airsoftoutletnw.com/index.php/Airsoft-Tactical-Gear/Face/Elbow/Knee-Protection/Condor-MICH-2002-Helmet-Replica-Black.html
I really look forward to this loadout, it will be my second.
I plan for a heavyer armor and stuff for the arm cannon and all and this lighter loadout for a aug a3.
but I will use parts from both for each.
-
What is this loadout even going to be?
-
Generic space age loadout #3352
Just wait for me to get about 1000$ I'l get it done and post pics
-
waffen SS loadout kooler
-
ww2 =/= space age
-
To be honest, it doesn't seem like it will look good. More like a random collection of gear you got at a Sporting Goods store because you couldn't fork out enough an actual MOLLE vest and camo.
I don't see why you'd spend $1000 on something that may look completely awful.
-
I've seen guys with a similar, motorcycle jacket at a Terminator Op we had a while back. Not the greatest looking in my opinion, sort of retarded looking.
Honestly, if you wanted arm mounted cannons and all that shit, it would be better to have a powered exoskeleton. Then you could hold a shitload of stuff and not even notice the weight. But those costs a lot and we don't exactly got small power supplies either yet for something like that.
An easier project would be a simple arm mounted M203. Just slid it open, drop your shell in and load a rocket and you're done. Not only that but you should be able to use a rifle without it getting in your way too much.
-
mount it to your forearm or something (A 203). Velcro straps or even tape.
-
Holy shit. Idea -
Make a STALKER Exo suit. Doesn't need to work, just look badass.
Ontop of that you could have a CAW Launcher (Bulldog 9 if we want to get into stalker lingo)
Is this awesome? Y/N.
-
alright thanks.
I should have thought it over a bit more.
-
Due to the fact every two tone G363 is Out of stock here in the UK, I'm planning to get a KJ P226 gas pistol. Anyone had any experiences with this or GBB's in general?
-
If you were planning to have that as your primary gun, it's not a very good idea. The ammo capacity is low and gas doesn't work so well in cold weather.
-
I'm aware that generally speaking having any pistol as a primary is a bad idea, however I'm not into serious skirmishing, more just pissing around in a forest with some mates. Besides... near everything suitable I find seems to be out of stock...
-
Well, if you're just getting it for messing around or to tide you over until something comes into stock, I can't see the harm in going for it.
-
Just rechecked www.actionhobbies.co.uk, the G36C is due to be back in stock this week. Looks like I might be in luck! It's a bit more expensive than zerooneairsoft but not too bad. Due to what you said about the gas, dudder, I think I'l go for that. Thanks alot.
-
continuing my previous idea, I already have the pressure suit for when I dirtbike so it would be quite easy to use in airsoft but it looks more like a jersey then armor so I dont know.
-
I bought a new title because my old one was bad and had a typo in it! What a chump!
June 2005
6,351 Posts
Does anyone know of places in the UK where I can send stuff off to get it fixed?
-
.Wordsworth posted:
-
that would work.
I'l do that I guess.
or a seva suit.
I just don't have any good pics of the exo-suit really.
-
Have garrysmod?
-
well yes. but how is that going to help me?
-
God damn, this place is impossible to find without a shortcut. It's Wordsworth here.
I got perma banned for "Calling everyone a dumbass" which is trolling. So I'm Codemonkey from here forward.
Edited:
Go to Garrysmod.org, look up stalker and download the NPC's and Ragdolls, then you can move, inspect and model whatever you want off them, using them as the refrence material.
-
these rules are getting really dumb.
I was banned recently for posting in a spam thread.
I mean what the fuck is that gay or what.
(user was permabanned for this post reason: complained about the nonexistant and unfair rules)
-
But it does't make sense, it was a thread where there was a evolution/creationist shitfest, so I poked fun at them and got to the point where I said; "Everyone who believes in evolution is a dumbass, fact."
Which I don't honestly believe, being an atheist myself. I get Permabannd for trolling.
GG Facepunch.
-
That's the entire reason I tend to stay away from the OIFY section. I'd rather not get banned for speaking my mind in the Facepunch equivalent of /b/.
-
I wasn't in OIFY. I've never been to OIFY.
I was in 'In The News'
In the "Sealife existed before Oxygen thread."
Edited:
Anyone know a decent mod I can consult?
-
cant find the ragdolls, but only a few npcs.
and the exo suit looks really hard for me to create and will require a LOT of metal and paint.
I really do not have the money or time required to build such a thing.
-
You were about to spend $1000 on what was basically dirt bike gear.
Artistic x 1
Optimistic x 1
Agree x 1
Informative x 1
Dumb x 1