Register
Events
Popular
More
Post #161
You mean make a custom model for the rockets with propellers? I was thinking of doing something similar. I'll probably give it a shot. The default rockets don't really fit the nuke launcher too well, gotta make them bulkier. I'll add a little flair to them.Hey Nzdjh, if you wanted to make your launcher have a more "aviator" feel, why not make rockets with propellers on the end that after being fired fall for a second then shoot out, much like a torpedo? Instead of making a nuke into the launcher?
I'm a bit confused by your last sentence though. Do you mean I shouldn't go with the converted-nuke-into-rocket-launcher idea? To be honest, I quite like it myself. Sure it's loosely aviation-based, but then again, so are my rocket boots, so I might change my theme to adapt to my changed ideas instead. I have no idea what, but I'll either make them fit the theme, or change the theme to fit them.
King of page.
-
-
Every slasher needs a mask. It's in the rules, you know. Jason had one. Michael had one. Leslie had one. And now, our favorite video game slasher has one.
Eat your heart out, Ghostface. There is a new king of stab in town...
EDIT:
I'd make a hole for his cigarette, but it was hard enough making the eye holes. Also, originaly, this was supposed to be a hockey mask, but I couldn't make the little holes down in the bottom of the mask, so instead he has two holes to breathe through, and also so he can talk unlike the Pyro.
EDIT:
No, I have no idea how to make holes in a mesh.
Now, if you know, and would like to PM me a tutorial I'd REALLY appreciate it, because then I'd give the Spy a proper hockey mask. Come on, he's obviously Canadian. French speaking (just like a damn canuk to speak french), lives in Alaska (must have moved from Ontario), likes hunting (given the game hen line), so he obviously likes hockey! Yeah, that's why he owns a hockey mask...
...not because he likes to stab people. Nooo...
-
I just assumed you started filming in the middle.
-
He speaks French like someone from France, not like a Canadian tbh.
Also I don't think a simple hole is enough because the facial animations move the cigarette.
-
Good point.
Still wish I knew how to create real holes in the mesh...
-
Select faces and delete those so you get a hole. Then set in new faces so can make the hole nicer.
-
Or you could use that Boolean cut, or whatever it's called.
-
Where is this Boolean thing? I've heard of it before.
-
I'd still like that Luger that I requested back in Daimao's threads.
-
Sparkwire and Daniel are working on a Luger/ and a ruger
Talk to them about it
Dunno if there going to be released at all.
-
I guess I should. Thanks.Sparkwire and Daniel are working on a Luger/ and a ruger
Talk to them about it
Dunno if there going to be released at all.
-
-
Psst, this is what I'm gonna attempt next after my Obrez.
-
Thats pretty cool. I was thinking more like...Psst, this is what I'm gonna attempt next after my Obrez.
For spy's revolver, but that looks like a replacement for sniper's SMG.
-
I want a different look as a standard Luger is done x times for other things.
-
Ive already asked on polycount but I'm going to ask here
which one guys?
Agree - 1
Disagree - 2
Funny - 3
Informative - hybrid/suggestion
-
I like #1 the most.
-
Hilarious.Ive already asked on polycount but I'm going to ask here
which one guys?
Agree - 1
Disagree - 2
Funny - 3
Informative - hybrid/suggestion
-
I say number 3.
-
Hey guys, I'm trying to decide if I should use Blender or 3ds Max.
I like Blender because it's less RAM-heavy which makes it more reliable and I can also multitask, and the fact that's it's easier to use. But I like 3ds Max because of it's wide variety of shit to use. In the end, I'll only be using Blender for modeling (and maybe texturing)and modeling only, the rest, like rendering, animating, and etc are going to be done in 3ds Max. I really want to use Blender but I really don't know if I should.
Also, a question about blender, how do you make it to where the model isn't transparent, because I can't select anything now?
-
It's the 3D square down in the toolbar, when in Edit mode.
-
That's practically the same situation I'm in Ashton - though personally it's a bit more because I just can't do anything at a decent speed in 3ds Max.
Anyway, if Ikare's suggestion doesn't work try tapping Z.
-
Well, I suck at modeling in 3ds, and I'm not...as bad in Blender, but I'm going to remodel my crossbow in Blender and see if I can make anything good
-
If you have both you can make it in blender and animate it in 3ds/maya.
Some professionals use a mix of several 3d modelling programs.
-
Doesn't Valve use Maya to model and animate? Or just to animate?
-
Animation certainly
Modelling, not so sure.
-
still need an answer here.
-
Simple texture. Suggestions?
-
Put some stains and shit and you're done, it's pretty clean already.
-
add some brushstroke effects and some signs of aging. no metal in tf2 is without either really. other then that, my only suggestion is perhaps put a medic cross on the side to make it more obvious for the class, but that's just me. it looks pretty solid.Simple texture. Suggestions?
-
I suggest using lighter colors, and instead of that gold color using a soft pastel would give that idea of "medical". :)
Also, can anyone let me know where this boolean cut thing can be found? I want it. I need it. I have to have it. :(
EDIT: Also, what is "baked AO"?
-
I had a crazy idea for spy's revolver. It would be a pack of cigarettes in one hand and a cigarette with a pointed end coming out of the tip held like a throwing knife in the other. Naturally, the name of the weapon would be Coffin Nails.
-
Can't.
All spy weapons have to only use the right hand, for the watch you see.
On the other hand, I like the way you're thinking.
-
Well darn, maybe just the lone cigarette then.
-
Uhhhh, I don't think I'm cut out for blender.
Edited:
You could edit the viewmodel of the spy's watch to hold the cigarettes.
-
Uhhhh, I don't think I'm cut out for blender.
-
That's why I said I wasn't cut out for it.
-
Dead Ringer.
Also, LISTEN UP NEWBS.
I was bored at work this morning, so I started searching for terms I've been trying to find answers to. I still can't find boolean cut, but I did learn about AO baking thanks to this thread on SPUF.
http://forums.steampowered.com/forum....php?t=1109465
A lot of your questions can be answered here, even though specifically it talks about hats a lot of this can be translated over to weapons and other items as well.
I am guilty of asking dumb inquires too that could have taken five minutes of searching to solve, but this tutorial answers a good 90% of the questions asked here.
Still, there are some questions it doesn't answer.
So where is the boolean cut feature in 3DSMax?
-
Object tab -> Compound Objects -> Boolean/ProBoolean
-
Try to avoid booleans anyway. They make a lot of vertex errors.
Dumb x 11
Agree x 1
Disagree x 1
x 19
x 1
Artistic x 20
